Показано с 1 по 11 из 11

Тема: Lan нестабильно работает

  1. #1
    Активный участник Аватар для RabbitSlayer
    Регистрация
    05.04.2011
    Сообщений
    757

    Lan нестабильно работает

    Модем Zyxel p600
    PC1 без проблем Win7
    PC2 нестабильно видит сеть, работает но скорость низкая Ubuntu 9.06/10 точно не
    помню. Есть подозрения что провод уже непригоден или компьютер уже умирает, но может ли быть что то ещё?
    Остальные тоже работают исправно.

  2. #2
    Активный участник
    Регистрация
    17.05.2010
    Сообщений
    653
    и что показывает ping айпи -c 100?

  3. #3
    Админ канала YouTube Аватар для [RazorBlade]
    Регистрация
    27.12.2010
    Сообщений
    548
    возьми провод от 1пк и проверь
    Канал СК2ТВшки на YouTube подпишись

  4. #4
    Активный участник Аватар для altwazar
    Регистрация
    17.05.2010
    Сообщений
    4,069
    Если там убунту, то в консоли набери dmesg после нескольких отпаданий сетки.
    Если в конце будут идущие рядом сообщения Ethernet link up, Ethernet link down - то скорее всего провод убит или неудачно обжат.

  5. #5
    Активный участник Аватар для RabbitSlayer
    Регистрация
    05.04.2011
    Сообщений
    757
    С проводом оказалось все в порядке Подключал ноут на том проводе все оказалось нормально. Проверил все настройки вроде все нормально, так как и должно быть, но аплоад постоянно в пределах 7кбс, а довнлоада вообще нету на том на котором Убунта.
    Убунта оказалось 9.04. Пинг, трасерт, да и просто достучатся до других компов невозможно. Как то проблема ввела в полный стопор.

  6. #6
    Активный участник Аватар для shr
    Регистрация
    17.05.2010
    Сообщений
    4,347
    Снифай трафик и смотри, где бьется. Адрес на компе точно нормальный? Иногда на работе бывают похожие глюки, когда я одним девайсом отбиваю коннект другому, ставя обоим 1 IP-адрес (забываю) и пингуя шлюз

  7. #7
    Активный участник Аватар для RabbitSlayer
    Регистрация
    05.04.2011
    Сообщений
    757
    Цитата Сообщение от Okabe Посмотреть сообщение
    Снифай трафик и смотри, где бьется. Адрес на компе точно нормальный? Иногда на работе бывают похожие глюки, когда я одним девайсом отбиваю коннект другому, ставя обоим 1 IP-адрес (забываю) и пингуя шлюз
    Проверял первым делом.
    А пинг я уже не знаю куда писать. Ya.ru и Google заблочили.

  8. #8
    Активный участник Аватар для shr
    Регистрация
    17.05.2010
    Сообщений
    4,347
    Пингуй сначал свой роутер. Ты о схеме сети ничего не написал - NAT у тебя на роутере или он тупой бридж и все настройки на компе. Адреса и т.д. Если уверен, что в настройках все норм - и на компах, и на роутере, а также что кабель цел - ну попробуй в качестве последнего средства сетевуху переставить с работающего компа.

  9. #9
    Активный участник Аватар для altwazar
    Регистрация
    17.05.2010
    Сообщений
    4,069
    Можешь подробнее написать схему подключения?
    Модем<-свитч<-два pc win7 и ubuntu? До которых машин не получалось достучаться с убунты, и как они подключены?
    Иногда можно заметить интересные вещи в выводе dmesg и в /var/log/messages.

  10. #10
    Активный участник Аватар для RabbitSlayer
    Регистрация
    05.04.2011
    Сообщений
    757
    Nat, схема самая простая.

    Скрытый текст

    tania@tania-desktop:~$ ping 192.168.1.1
    PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
    64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=0.694 ms
    64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=0.687 ms
    64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=0.701 ms
    64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=0.703 ms
    64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=0.694 ms
    64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=0.703 ms
    64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=0.703 ms
    64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=0.726 ms
    64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=0.832 ms
    64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=0.738 ms
    64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=0.723 ms
    64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=0.719 ms
    64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=0.727 ms
    64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=0.728 ms
    64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=0.726 ms
    64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=0.725 ms
    64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=0.725 ms
    64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=0.709 ms
    64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=0.725 ms
    64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=0.727 ms
    64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=0.714 ms
    64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=0.725 ms
    64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=0.712 ms
    64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=0.834 ms
    64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=0.724 ms
    64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=0.712 ms
    64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=0.727 ms
    64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=0.726 ms
    64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=0.728 ms
    64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=0.714 ms
    64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=0.713 ms
    64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=0.726 ms
    64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=0.728 ms
    ^C
    --- 192.168.1.1 ping statistics ---
    52 packets transmitted, 33 received, 36% packet loss, time 51076ms
    rtt min/avg/max/mdev = 0.687/0.724/0.834/0.034 ms
    tania@tania-desktop:~$
    [свернуть]

    Скрытый текст

    [ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.28-19-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #61-Ubuntu SMP Wed May 26 23:35:15 UTC 2010 (Ubuntu 2.6.28-19.61-generic)
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] NSC Geode by NSC
    [ 0.000000] Cyrix CyrixInstead
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] Transmeta GenuineTMx86
    [ 0.000000] Transmeta TransmetaCPU
    [ 0.000000] UMC UMC UMC UMC
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    [ 0.000000] Scanning 2 areas for low memory corruption
    [ 0.000000] modified physical RAM map:
    [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
    [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
    [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
    [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
    [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
    [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable)
    [ 0.000000] modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
    [ 0.000000] modified: 000000001fff3000 - 0000000020000000 (ACPI data)
    [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-16000
    [ 0.000000] RAMDISK: 1f8ab000 - 1ffdf970
    [ 0.000000] ACPI: RSDP 000F6920, 0014 (r0 GBT )
    [ 0.000000] ACPI: RSDT 1FFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
    [ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
    [ 0.000000] ACPI: DSDT 1FFF30C0, 3DA3 (r1 GBT AWRDACPI 1000 MSFT 100000C)
    [ 0.000000] ACPI: FACS 1FFF0000, 0040
    [ 0.000000] ACPI: APIC 1FFF6E80, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 0MB HIGHMEM available.
    [ 0.000000] 511MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 1fff0000
    [ 0.000000] low ram: 00000000 - 1fff0000
    [ 0.000000] bootmap 00012000 - 00016000
    [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
    [ 0.000000] #4 [001f8ab000 - 001ffdf970] RAMDISK ==> [001f8ab000 - 001ffdf970]
    [ 0.000000] #5 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
    [ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
    [ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
    [ 0.000000] found SMP MP-table at [c00f4fa0] 000f4fa0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000000 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x0001fff0
    [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[4] active PFN ranges
    [ 0.000000] 0: 0x00000000 -> 0x00000002
    [ 0.000000] 0: 0x00000006 -> 0x00000007
    [ 0.000000] 0: 0x00000010 -> 0x00000092
    [ 0.000000] 0: 0x00000100 -> 0x0001fff0
    [ 0.000000] On node 0 totalpages: 130933
    [ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1000000
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3941 pages, LIFO batch:0
    [ 0.000000] Normal zone: 992 pages used for memmap
    [ 0.000000] Normal zone: 125968 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 0 pages used for memmap
    [ 0.000000] Movable zone: 0 pages used for memmap
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
    [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
    [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
    [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129909
    [ 0.000000] Kernel command line: root=UUID=21ee75c5-1c74-4494-991c-99d4c77e60eb ro quiet splash
    [ 0.000000] Enabling fast FPU save and restore... done.
    [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
    [ 0.000000] Initializing CPU#0
    [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3014.577 MHz processor.
    [ 0.004000] Console: colour VGA+ 80x25
    [ 0.004000] console [tty0] enabled
    [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.004000] allocated 2621120 bytes of page_cgroup
    [ 0.004000] please try cgroup_disable=memory option if you don't want
    [ 0.004000] Scanning for low memory corruption every 60 seconds
    [ 0.004000] Memory: 501368k/524224k available (4116k kernel code, 22240k reserved, 2199k data, 532k init, 0k highmem)
    [ 0.004000] virtual kernel memory layout:
    [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
    [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
    [ 0.004000] vmalloc : 0xe07f0000 - 0xff3fe000 ( 492 MB)
    [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
    [ 0.004000] .data : 0xc0505131 - 0xc072ae60 (2199 kB)
    [ 0.004000] .text : 0xc0100000 - 0xc0505131 (4116 kB)
    [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 6029.15 BogoMIPS (lpj=12058308)
    [ 0.004031] Security Framework initialized
    [ 0.004038] SELinux: Disabled at boot.
    [ 0.004057] AppArmor: AppArmor initialized
    [ 0.004068] Mount-cache hash table entries: 512
    [ 0.004209] Initializing cgroup subsys ns
    [ 0.004214] Initializing cgroup subsys cpuacct
    [ 0.004217] Initializing cgroup subsys memory
    [ 0.004222] Initializing cgroup subsys freezer
    [ 0.004239] CPU: Trace cache: 12K uops, L1 D cache: 16K
    [ 0.004243] CPU: L2 cache: 1024K
    [ 0.004246] CPU: Physical Processor ID: 0
    [ 0.004248] CPU: Processor Core ID: 0
    [ 0.004261] Checking 'hlt' instruction... OK.
    [ 0.023331] ACPI: Core revision 20080926
    [ 0.025604] ACPI: Checking initramfs for custom DSDT
    [ 0.314933] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.354624] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
    [ 0.356001] Booting processor 1 APIC 0x1 ip 0x6000
    [ 0.004000] Initializing CPU#1
    [ 0.004000] Calibrating delay using timer specific routine.. 6029.36 BogoMIPS (lpj=12058733)
    [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
    [ 0.004000] CPU: L2 cache: 1024K
    [ 0.004000] CPU: Physical Processor ID: 0
    [ 0.004000] CPU: Processor Core ID: 0
    [ 0.440400] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
    [ 0.440425] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [ 0.444063] Brought up 2 CPUs
    [ 0.444069] Total of 2 processors activated (12058.52 BogoMIPS).
    [ 0.444119] CPU0 attaching sched-domain:
    [ 0.444122] domain 0: span 0-1 level SIBLING
    [ 0.444125] groups: 0 1
    [ 0.444133] CPU1 attaching sched-domain:
    [ 0.444136] domain 0: span 0-1 level SIBLING
    [ 0.444138] groups: 1 0
    [ 0.444229] net_namespace: 776 bytes
    [ 0.444232] Booting paravirtualized kernel on bare hardware
    [ 0.444469] Time: 17:43:34 Date: 09/13/11
    [ 0.444469] regulator: core version 0.5
    [ 0.444469] NET: Registered protocol family 16
    [ 0.444469] EISA bus registered
    [ 0.444469] ACPI: bus type pci registered
    [ 0.469492] PCI: PCI BIOS revision 2.10 entry at 0xfb130, last bus=2
    [ 0.469495] PCI: Using configuration type 1 for base access
    [ 0.470630] ACPI: EC: Look up EC in DSDT
    [ 0.477429] ACPI: Interpreter enabled
    [ 0.477435] ACPI: (supports S0 S1 S4 S5)
    [ 0.477462] ACPI: Using IOAPIC for interrupt routing
    [ 0.483189] ACPI: No dock devices found.
    [ 0.483205] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 0.483266] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
    [ 0.483404] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f]
    [ 0.483458] pci 0000:00:1d.1: reg 20 io port: [0xb000-0xb01f]
    [ 0.483512] pci 0000:00:1d.2: reg 20 io port: [0xb400-0xb41f]
    [ 0.483565] pci 0000:00:1d.3: reg 20 io port: [0xb800-0xb81f]
    [ 0.483618] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfa100000-0xfa1003ff]
    [ 0.483664] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.483670] pci 0000:00:1d.7: PME# disabled
    [ 0.483757] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    [ 0.483764] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    [ 0.483768] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH4 GPIO
    [ 0.483789] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    [ 0.483797] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    [ 0.483804] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
    [ 0.483811] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
    [ 0.483818] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
    [ 0.483826] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
    [ 0.483877] pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f]
    [ 0.483921] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
    [ 0.483928] pci 0000:00:1f.5: reg 14 io port: [0xdc00-0xdc3f]
    [ 0.483935] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfa101000-0xfa1011ff]
    [ 0.483942] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfa102000-0xfa1020ff]
    [ 0.483966] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
    [ 0.483971] pci 0000:00:1f.5: PME# disabled
    [ 0.484027] pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
    [ 0.484033] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
    [ 0.484055] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    [ 0.484105] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    [ 0.484109] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
    [ 0.484154] pci 0000:02:08.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
    [ 0.484161] pci 0000:02:08.0: reg 14 io port: [0xa000-0xa03f]
    [ 0.484193] pci 0000:02:08.0: supports D1 D2
    [ 0.484195] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.484200] pci 0000:02:08.0: PME# disabled
    [ 0.484234] pci 0000:00:1e.0: transparent bridge
    [ 0.484239] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
    [ 0.484244] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa000000-0xfa0fffff]
    [ 0.484260] bus 00 -> node 0
    [ 0.484268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.484494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.491337] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [ 0.491478] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [ 0.491616] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.491753] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [ 0.491891] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.492043] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [ 0.492184] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [ 0.492323] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [ 0.492483] ACPI: WMI: Mapper loaded
    [ 0.492552] SCSI subsystem initialized
    [ 0.492552] libata version 3.00 loaded.
    [ 0.492552] usbcore: registered new interface driver usbfs
    [ 0.492552] usbcore: registered new interface driver hub
    [ 0.492552] usbcore: registered new device driver usb
    [ 0.492552] PCI: Using ACPI for IRQ routing
    [ 0.500014] Bluetooth: Core ver 2.13
    [ 0.500038] NET: Registered protocol family 31
    [ 0.500038] Bluetooth: HCI device and connection manager initialized
    [ 0.500038] Bluetooth: HCI socket layer initialized
    [ 0.500038] NET: Registered protocol family 8
    [ 0.500038] NET: Registered protocol family 20
    [ 0.500049] NetLabel: Initializing
    [ 0.500051] NetLabel: domain hash size = 128
    [ 0.500053] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.500074] NetLabel: unlabeled traffic allowed by default
    [ 0.500174] hpet clockevent registered
    [ 0.500179] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.500185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.500191] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.504083] AppArmor: AppArmor Filesystem Enabled
    [ 0.512014] pnp: PnP ACPI init
    [ 0.512029] ACPI: bus type pnp registered
    [ 0.516307] pnp: PnP ACPI: found 14 devices
    [ 0.516310] ACPI: ACPI bus type pnp unregistered
    [ 0.516317] PnPBIOS: Disabled by ACPI PNP
    [ 0.516330] system 00:00: iomem range 0xcf800-0xcffff has been reserved
    [ 0.516334] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
    [ 0.516338] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
    [ 0.516341] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
    [ 0.516344] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
    [ 0.516347] system 00:00: iomem range 0x0-0x9ffff could not be reserved
    [ 0.516351] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
    [ 0.516355] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
    [ 0.516358] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
    [ 0.516361] system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved
    [ 0.516364] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
    [ 0.516368] system 00:00: iomem range 0xfff00000-0xffffffff has been reserved
    [ 0.516371] system 00:00: iomem range 0xe0000-0xeffff has been reserved
    [ 0.516380] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
    [ 0.516383] system 00:02: ioport range 0x290-0x29f has been reserved
    [ 0.516386] system 00:02: ioport range 0x800-0x805 has been reserved
    [ 0.551132] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    [ 0.551135] pci 0000:00:01.0: IO window: disabled
    [ 0.551141] pci 0000:00:01.0: MEM window: 0xf8000000-0xf9ffffff
    [ 0.551146] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
    [ 0.551152] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    [ 0.551156] pci 0000:00:1e.0: IO window: 0xa000-0xafff
    [ 0.551162] pci 0000:00:1e.0: MEM window: 0xfa000000-0xfa0fffff
    [ 0.551167] pci 0000:00:1e.0: PREFETCH window: disabled
    [ 0.551185] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.551191] bus: 00 index 0 io port: [0x00-0xffff]
    [ 0.551193] bus: 00 index 1 mmio: [0x000000-0xffffffff]
    [ 0.551196] bus: 01 index 0 mmio: [0x0-0x0]
    [ 0.551198] bus: 01 index 1 mmio: [0xf8000000-0xf9ffffff]
    [ 0.551201] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff]
    [ 0.551203] bus: 01 index 3 mmio: [0x0-0x0]
    [ 0.551206] bus: 02 index 0 io port: [0xa000-0xafff]
    [ 0.551208] bus: 02 index 1 mmio: [0xfa000000-0xfa0fffff]
    [ 0.551211] bus: 02 index 2 mmio: [0x0-0x0]
    [ 0.551213] bus: 02 index 3 io port: [0x00-0xffff]
    [ 0.551215] bus: 02 index 4 mmio: [0x000000-0xffffffff]
    [ 0.551225] NET: Registered protocol family 2
    [ 0.564075] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.564371] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.564440] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.564505] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.564508] TCP reno registered
    [ 0.572080] NET: Registered protocol family 1
    [ 0.572238] checking if image is initramfs... it is
    [ 1.000508] Switched to high resolution mode on CPU 1
    [ 1.004018] Switched to high resolution mode on CPU 0
    [ 1.165841] Freeing initrd memory: 7378k freed
    [ 1.165916] cpufreq: No nForce2 chipset.
    [ 1.166103] audit: initializing netlink socket (disabled)
    [ 1.166124] type=2000 audit(1315935814.165:1): initialized
    [ 1.174023] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.175604] VFS: Disk quotas dquot_6.5.1
    [ 1.175683] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.176509] fuse init (API version 7.10)
    [ 1.176615] msgmni has been set to 993
    [ 1.177044] alg: No test for stdrng (krng)
    [ 1.177064] io scheduler noop registered
    [ 1.177069] io scheduler anticipatory registered
    [ 1.177073] io scheduler deadline registered
    [ 1.177100] io scheduler cfq registered (default)
    [ 1.177217] pci 0000:01:00.0: Boot video device
    [ 1.177239] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
    [ 1.180970] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.180982] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.181151] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    [ 1.181154] ACPI: Power Button (FF) [PWRF]
    [ 1.181210] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 1.181213] ACPI: Power Button (CM) [PWRB]
    [ 1.181265] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 1.181273] ACPI: Sleep Button (CM) [SLPB]
    [ 1.181546] processor ACPI_CPU:00: registered as cooling_device0
    [ 1.181596] processor ACPI_CPU:01: registered as cooling_device1
    [ 1.183856] isapnp: Scanning for PnP cards...
    [ 1.535528] isapnp: No Plug & Play device found
    [ 1.548166] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    [ 1.548256] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.548346] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 1.548720] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.548870] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 1.549853] brd: module loaded
    [ 1.550270] loop: module loaded
    [ 1.550368] Fixed MDIO Bus: probed
    [ 1.550375] PPP generic driver version 2.4.2
    [ 1.550449] input: Macintosh mouse button emulation as /devices/virtual/input/input3
    [ 1.550489] Driver 'sd' needs updating - please use bus_type methods
    [ 1.550501] Driver 'sr' needs updating - please use bus_type methods
    [ 1.550591] ata_piix 0000:00:1f.1: version 2.12
    [ 1.550610] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 1.550661] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.550779] scsi0 : ata_piix
    [ 1.550914] scsi1 : ata_piix
    [ 1.551836] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 1.551840] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 1.776280] ata1.00: HPA unlocked: 234439535 -> 234441648, native 234441648
    [ 1.776286] ata1.00: ATA-6: ST3120022A, 8.54, max UDMA/100
    [ 1.776289] ata1.00: 234441648 sectors, multi 16: LBA48
    [ 1.792434] ata1.00: configured for UDMA/100
    [ 1.956293] ata2.00: ATAPI: LITE-ON COMBO SOHC-5232K, NK0G, max UDMA/44
    [ 1.956325] ata2.00: limited to UDMA/33 due to 40-wire cable
    [ 1.972242] ata2.00: configured for UDMA/33
    [ 1.972967] scsi 0:0:0:0: Direct-Access ATA ST3120022A 8.54 PQ: 0 ANSI: 5
    [ 1.973090] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
    [ 1.973113] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.973116] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.973152] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.973235] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
    [ 1.973255] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.973259] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.973294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.973299] sda: sda1 sda2 < sda5 sda6 sda7 >
    [ 2.024045] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.024113] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 2.025180] scsi 1:0:0:0: CD-ROM LITE-ON COMBO SOHC-5232K NK0G PQ: 0 ANSI: 5
    [ 2.030363] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
    [ 2.030367] Uniform CD-ROM driver Revision: 3.20
    [ 2.030484] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.030533] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 2.031317] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.031348] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [ 2.031378] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 2.031383] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 2.031465] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 2.035376] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
    [ 2.035394] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa100000
    [ 2.048013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 2.048098] usb usb1: configuration #1 chosen from 1 choice
    [ 2.048136] hub 1-0:1.0: USB hub found
    [ 2.048145] hub 1-0:1.0: 8 ports detected
    [ 2.048289] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.048309] uhci_hcd: USB Universal Host Controller Interface driver
    [ 2.048343] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.048351] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 2.048355] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 2.048410] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.048439] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bc00
    [ 2.048527] usb usb2: configuration #1 chosen from 1 choice
    [ 2.048561] hub 2-0:1.0: USB hub found
    [ 2.048570] hub 2-0:1.0: 2 ports detected
    [ 2.048676] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 2.048683] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 2.048687] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 2.048741] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 2.048770] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
    [ 2.048859] usb usb3: configuration #1 chosen from 1 choice
    [ 2.048892] hub 3-0:1.0: USB hub found
    [ 2.048900] hub 3-0:1.0: 2 ports detected
    [ 2.049002] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 2.049009] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 2.049013] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 2.049078] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 2.049106] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
    [ 2.049194] usb usb4: configuration #1 chosen from 1 choice
    [ 2.049226] hub 4-0:1.0: USB hub found
    [ 2.049235] hub 4-0:1.0: 2 ports detected
    [ 2.049336] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.049342] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 2.049346] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 2.049406] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 2.049427] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
    [ 2.049519] usb usb5: configuration #1 chosen from 1 choice
    [ 2.049554] hub 5-0:1.0: USB hub found
    [ 2.049562] hub 5-0:1.0: 2 ports detected
    [ 2.049737] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.052482] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.052490] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.056055] mice: PS/2 mouse device common for all mice
    [ 2.072081] rtc_cmos 00:04: RTC can wake from S4
    [ 2.072127] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 2.072151] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 2.072242] device-mapper: uevent: version 1.0.3
    [ 2.072368] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    [ 2.072481] device-mapper: multipath: version 1.0.5 loaded
    [ 2.072487] device-mapper: multipath round-robin: version 1.0.0 loaded
    [ 2.072599] EISA: Probing bus 0 at eisa.0
    [ 2.072608] Cannot allocate resource for EISA slot 1
    [ 2.072638] EISA: Detected 0 cards.
    [ 2.072713] cpuidle: using governor ladder
    [ 2.072717] cpuidle: using governor menu
    [ 2.073419] TCP cubic registered
    [ 2.073512] NET: Registered protocol family 10
    [ 2.074087] lo: Disabled Privacy Extensions
    [ 2.074546] NET: Registered protocol family 17
    [ 2.074569] Bluetooth: L2CAP ver 2.11
    [ 2.074572] Bluetooth: L2CAP socket layer initialized
    [ 2.074575] Bluetooth: SCO (Voice Link) ver 0.6
    [ 2.074577] Bluetooth: SCO socket layer initialized
    [ 2.074624] Bluetooth: RFCOMM socket layer initialized
    [ 2.074639] Bluetooth: RFCOMM TTY layer initialized
    [ 2.074643] Bluetooth: RFCOMM ver 1.10
    [ 2.074715] Using IPI No-Shortcut mode
    [ 2.074825] registered taskstats version 1
    [ 2.074940] Magic number: 11:482:744
    [ 2.075020] rtc_cmos 00:04: setting system clock to 2011-09-13 17:43:35 UTC (1315935815)
    [ 2.075023] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 2.075025] EDD information not available.
    [ 2.075486] Freeing unused kernel memory: 532k freed
    [ 2.075648] Write protecting the kernel text: 4120k
    [ 2.075706] Write protecting the kernel read-only data: 1524k
    [ 2.104203] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [ 2.368128] Floppy drive(s): fd0 is 1.44M
    [ 2.387970] FDC 0 is a post-1991 82077
    [ 2.480408] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
    [ 2.480414] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 2.480514] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 2.503867] e100 0000:02:08.0: PME# disabled
    [ 2.520032] e100: eth0: e100_probe: addr 0xfa000000, irq 20, MAC addr 00:0f:ea:38:72:23
    [ 3.139687] PM: Starting manual resume from disk
    [ 3.139691] PM: Resume from partition 8:1
    [ 3.139693] PM: Checking hibernation image.
    [ 3.139895] PM: Resume from disk failed.
    [ 3.164622] kjournald starting. Commit interval 5 seconds
    [ 3.164633] EXT3-fs: mounted filesystem with ordered data mode.
    [ 8.244255] udev: starting version 141
    [ 8.393948] Linux agpgart interface v0.103
    [ 8.509405] agpgart-intel 0000:00:00.0: Intel 865 Chipset
    [ 8.517024] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
    [ 8.858122] parport_pc 00:0a: reported by Plug and Play ACPI
    [ 8.858176] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 8.898674] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 8.980095] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 9.059971] intel_rng: FWH not detected
    [ 9.236123] ppdev: user-space parallel port driver
    [ 9.358938] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
    [ 9.528662] nvidia: module license 'NVIDIA' taints kernel.
    [ 9.575292] iTCO_vendor_support: vendor-support=0
    [ 9.578666] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    [ 9.578867] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
    [ 9.579036] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 9.783040] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 9.783717] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.10 Sat Jan 24 19:49:38 PST 2009
    [ 9.828988] psmouse serio1: ID: 10 00 64<6>Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 10.011038] Intel ICH 0000:00:1f.5: setting latency timer to 64
    [ 10.332012] intel8x0_measure_ac97_clock: measured 54711 usecs
    [ 10.332015] intel8x0: clocking to 48000
    [ 10.360365] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
    [ 10.510781] lp0: using parport0 (interrupt-driven).
    [ 10.642489] Adding 995988k swap on /dev/sda1. Priority:-1 extents:1 across:995988k
    [ 11.200626] EXT3 FS on sda6, internal journal
    [ 12.328457] kjournald starting. Commit interval 5 seconds
    [ 12.328660] EXT3 FS on sda5, internal journal
    [ 12.328667] EXT3-fs: mounted filesystem with ordered data mode.
    [ 12.375660] kjournald starting. Commit interval 5 seconds
    [ 12.376232] EXT3 FS on sda7, internal journal
    [ 12.376239] EXT3-fs: mounted filesystem with ordered data mode.
    [ 12.777858] type=1505 audit(1315935826.200:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1928
    [ 12.830555] type=1505 audit(1315935826.252:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1932
    [ 12.830719] type=1505 audit(1315935826.252:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1932
    [ 12.830781] type=1505 audit(1315935826.252:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1932
    [ 12.830833] type=1505 audit(1315935826.252:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1932
    [ 12.977796] type=1505 audit(1315935826.401:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1937
    [ 12.978033] type=1505 audit(1315935826.401:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1937
    [ 13.010613] type=1505 audit(1315935826.432:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1941
    [ 15.767663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 15.767670] Bluetooth: BNEP filters: protocol multicast
    [ 15.789785] Bridge firewalling registered
    [ 18.111503] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
    [ 18.111530] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
    [ 18.111581] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
    [ 21.592942] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 21.596122] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    [ 21.602947] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 31.836008] eth0: no IPv6 routers present
    [свернуть]
    Последний раз редактировалось Igramul; 13.09.2011 в 20:54.

  11. #11
    Админ канала YouTube Аватар для [RazorBlade]
    Регистрация
    27.12.2010
    Сообщений
    548
    36% packet loss, Holy shiiii что то с проводом, сетевухой или с портом
    Канал СК2ТВшки на YouTube подпишись

Информация о теме

Пользователи, просматривающие эту тему

Эту тему просматривают: 1 (пользователей: 0 , гостей: 1)

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •